UAB "Biotecha"

Antakalnio g. 36,
10305 Vilnius, Lietuva
tel: +370 5 270 9055 
El. paštas: info@biotecha.lt

Level I water quality

Water is one of the most commonly used solvents in the laboratory. In some cases, water content is more than 99% of the weight of a solution. Therefore, laboratory water quality is a critical factor in determining the quality and reliability of tests. Based on the quality of purification, water is divided into: Water quality level I, water quality level II, and water quality level III. There’s also a separate group of water systems for analyzers.

Ultra pure water from your chosen water source – tap water or clean water (Elix, RiOs systems, distilled or DI water).

Water quality level I – ultraclean water

Merck produces water systems that supply ultraclean water. Some of them simply use tap water; others need clean water (Elix, RiOs systems, distilled or DI water). When choosing an ultraclean water system, you should be guided by the following parameters: quality of the water supplied, disposable and one-day ultraclean or ultraclean and clean water consumption, water quality monitoring, certification level, etc.

Ultraclean water straight from the tap 

Merck offers compact systems for laboratories that do not have access to clean water. The system can supply both clean and ultraclean water directly from the tap. The system has several advantages:

  • A complete water system that occupies a minimal amount of space in any laboratory that has a supply of tap water.
  • No need for a central cleaning system, which is often complicated, expensive and difficult to maintain and expand.
  • Provides users with full autonomy in choosing the water treatment stages and the final water quality.

Milli-Q Integral system

Ultra clean water supply up to 200 l/day and clean water up to 350 l/day

Milli-Q Direct 8 and 16 ultraclean water system

Ultra clean water supply up to 200 l/day and clean water up to 350 l/day

Direct-Q 3, 5, 8 ultraclean water system

Ultra clean water supply up to 10 l/day and clean water up to 150 l/day

Ultra pure water from clean water

Merck can provide specific solutions for laboratories which can produce clean water or those requiring large amounts of clean water and small to large quantities of ultra-pure water.

Milli-Q Advantage

Ultra clean (water quality level I) water supply up to 300 l/day.

Q-POD element

Merck has developed the Q-POD element for researchers carrying out analysis at the ppt or sub-ppt level, according to techniques such as ICP-MS for detecting trace elements. Used in conjunction with a Milli-Q Integral or Milli-Q Advantage, the new Q-POD will give you access to the next level of trace analysis.

Milli-Q Reference

Ultra clean (water quality level I) water supply up to 200 l/day.

Synergy Ultra pure water system

Ultra clean (water quality level I) water supply up to 100 l/day.

ICW300 water system

Direct Ultra clean water supply for Dionex ion chromatography.

Simplicity Ultra pure water system

Ultra clean (water quality level I) water supply up to 5 l/day. Personal system for cost-efficient ultra pure water replacement in bottles.

Super-Q

Ultra clean (water quality level I) water supply up to 12,000 l/day. For small-scale and pilot projects.

2018.11.15 12:11 Atspausdinta iš UAB "Biotecha" tinklalapio.
Adress: http://www.biotecha.lt/